Mini WiFi OBD2 Scanner, BGFOX OBD Car Code Readers & Scan Tools, Compatible


Price: $15.99
(as of Jan 29,2022 03:22:54 UTC – Details)


Product Description

BGFOXBGFOX

FUNCTION DISPLAYFUNCTION DISPLAY

Equipment requirements: When you install and display, the system requirements are in Android 4.0-4.4.

Android 4.3Android 4.3

WIFI SUPER OBD AUTO CHECKER is capable of communicating with vehicles which adopt following protocols:

1.ISO9141-2(5 baud init,10.4Kbaud)

2.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)

3.ISO14230-4 KWP (fast init, 10.4 Kbaud)

4.ISO15765-4 CAN (11bit ID, 500 Kbaud)

5.ISO15765-4 CAN (29bit ID, 500 Kbaud)

6.ISO15765-4 CAN (11bit ID, 250 Kbaud)

7.ISO15765-4 CAN (29bit ID, 250 Kbaud)

8.SAE J1850 PWM (41.6 Kbaud)

9.SAE J1850 VPW (10.4 Kbaud)

10.SAE J1939 CAN (29bit ID, 250*Kbaud)

11.USER1 CAN (11*bit ID, 125*Kbaud)

12.USER2 CAN (11*bit ID, 50*kbaud)

WIFI CONNECTION ANDROID/IOSWIFI CONNECTION ANDROID/IOS

SOFTWARE INSTALLATIONSOFTWARE INSTALLATION

Product parameters:

Material: automotive grade plastic

SSID: WiFi_OBD

IP: 192.168.0.10

Subnet: 255.255.255.0

Range: 50 ft (Line of sight)

Antenna: Internal

Wifi Standard: 802.11a/b/g

Output protocol: RS232 serial port

Baud rate: 38400

Working voltage: 9-16V

Working current: 45 mA

Operating temperature: -40 to 100 Deg Celsius

SOFTWARE SETUPSOFTWARE SETUP

Package Included:

1* WiFi Super OBD2

1*Instruction manual

Powerful: WIFI SUPER OBD code readers & scan tools can read car error codes in real time and display its information through the APP bound by cell phone, view car performance, sensor data, Vehicle Speed,Fuel Consumption,Engine Coolant Temp,Fuel Pressure,Calculated Engine Load,Throttle Position,Intake Manifold Pressure,Air Intake Temp,Timing Advance,Mass Air Flow,Fuel Level,Barometric Pressure,EVAP System Vapor Pressure,Fuel Trim,etc.(Note: Your vehicle may not support all above parameters. )
Widely compatible: WiFi SUPER OBD, support all OBDⅡ protocol products, compatible with a variety of system software, applicable to Android, IOS devices and Windows PC. Works with all OBD2 compliant vehicles. Works on all 1996 to 2010 cars and light trucks, some 1994 and 1995 models are also ok. Work with 12V vehicles. DO NOT support 24V diesel /trucks. How to see if your vehicle is comliant with OBD II? Please pop the hood and look for a sticker named ” VEHICLE EMISSION CONTORL INFORMATION” .
Easy to operate: By scanning the QR code on the manual, you can use your cell phone or tablet to download an “inCarDoc” software, plug this WIFI SUPER OBD scanner into the OBD II port of your car, then open the software and start the car, search and match with OBD2 through the software. You will be successfully connected to the car’s electronic control unit.
Connection steps: firstly, select the device, general, WIFI, secondly, make sure WIFI is on, wait for the scanner to appear, then select the device, wait for it to show the connection, enter Pin(1234) and finally exit.
Buyer Tips: Only support WIFI connection and bluetooth connection is not supported. This one can’t support for Diesel or Trucks .Please close anti-virus programmer when install software, otherwise the file will be attacked or deleted. Please take it easy, software in QR code is safe to your computer.

The BGFOX OBD Car Code Reader is an affordable, high-quality tool for reading trouble codes from vehicles. These diagnostic tools access the on-board computer of the vehicle and log the error codes for you. The fault codes are based on the information collected by sensors that are integrated into the car’s engine. The system continuously monitors temperature, fuel, oxygen, and other conditions. The error codes are stored in the system’s memory until they are cleared or repaired. If the problem cannot be fixed, the check engine light will come on again.

The BGFOX OBD Car Code Reader is easy to use and requires no training. The device displays error codes on the screen and also allows you to diagnose the problem. This tool comes with a battery charger and is equipped with a USB port. The USB interface of the BGFOX OBD CarCode Reader makes it easy to connect the device to the car. The mini OBD is compatible with many vehicles, including cars and SUVs.

The BGFOX OBD Car Code Reader is a great tool for DIY mechanics. Its compact size makes it easy to carry around and is easy to use. The Mini Obd is available in multiple models and is perfect for anyone looking for a quick and reliable diagnosis of their vehicle’s condition. The BGFOX OBD Car Code Readout is compatible with all vehicles manufactured since 1996.

The BGFOX OBD Car Code Reader is compatible with most modern cars. Its size and portability make it an ideal tool for use in the workshop. Its easy-to-use interface makes it easy for a novice mechanic to use. The reader can read up to 16 fault codes at one time, and it’s easy to set up for auto repair jobs. With the Mini OBD, you can diagnose your car and save money on labor costs.

The Mini Obd is an excellent product for DIY mechanics. The port is located on the car’s engine. It can read fault codes and give you valuable information. It is easy to use and is compatible with most modern cars. It can be used to troubleshoot your car’s engine and diagnose the malfunctions in your car. You can also use the BGFOX OBD to analyze the data of the cylinders.