JoyFans 1L Capacity Pneumatic Brake Fluid Bleeder

Price: $17.98
(as of Dec 28,2022 06:06:56 UTC – Details)

A brake fluid bleeder

A brake fluid bleeder is a tool that is used to remove air from the brake system of a vehicle. When air gets into the brake system, it can cause problems such as poor brake performance, reduced braking power, and a spongy brake pedal. By removing the air from the system, you can ensure that the brakes are functioning properly and provide optimal stopping power.

There are several different types of brake fluid bleeders available, including manual and electric models. Manual brake fluid bleeders are typically simple devices that consist of a hose and a valve that can be opened and closed to control the flow of fluid. Electric brake fluid bleeders, on the other hand, are more complex and typically feature a motor that pumps the fluid through the system.

To use a brake fluid bleeder, you will need to first locate the brake fluid reservoir on your vehicle. This is usually located near the engine or in the trunk. Once you have found the reservoir, you will need to attach the brake fluid bleeder to the bleeder valve on one of the brake calipers. You will then need to open the bleeder valve and allow the fluid to flow out of the system until all of the air has been removed.

Brake fluid bleeders are an essential tool for anyone who works on vehicles, as they allow you to quickly and easily remove air from the brake system. By using a brake fluid bleeder, you can ensure that your vehicle’s brakes are functioning properly and provide optimal stopping power.
Product Description

JoyFans 1L Capacity Pneumatic Vacuum Brake Bleeder Kit allows for single-man fluid flush & replacement operation, simple and convenient.

Getting rid of troublesome old method that drains old oil by hand and keeps steping the brake pedals.

Set Contents

1 * 1L Pneumatic Brake Fluid Extractor with 1.8M Vacuum Hose & Nipple

1 * 0.8L Oil Refill Bottle with Lid & Long Screw & O-ring

4 * Master Cylinder Adapters

1 * European Air Quick Plug

1 * American Air Quick Plug

1 * Spare Bleeder Nipple & Barbed Connector

1 * Instruction

 

About JoyFans Air Brake Bleeder Tool

1. Metal, plastic and silicone construction.

2. Equipped with portable hook and convenient settings.

One-man Pneumatic Brake Fluid Extractor Kit

Reasons for choosing this vacuum brake bleeder kit?

1. One-man convenient tool

Do it all by yourself!

No need to use troublesome traditional methods that needs to remove the tire nor requires brake lever / pedal, saving a lot of energy and time.

2. Quick and efficient work

Vacuum brake bleeding tool kit can flush out old brake fluid and air, and directs the new fluid to refill the entire brake system.

3. Multi-purpose use

Allows for fluid discharge with brake oil, engine oil, clutch oil, power steering oil, gear oil, coolant, water, etc.

√ Exquisite appearance and comfortable grip.
√ Compressed air tool creates efficient vacuum condition.
√ Perfect for cars, motorcycles, SUVs and trucks.

1. Waste Oil Container

Volume: 1000ml. Used to hold waste oils.

Scale-free translucent bottle body. Visible observation avoids oil splashing out.

Tapered design for safety and stability, not easy to deform or fall.

2. Handsfree Mechanism

Vacuum brake bleeder tool has hanging hook and quick self-locking catch, no need to hold the pump during the whole bleeding process.

3. Lid & Settings

The ergonomically designed handle, antislip and not easy to feel fatigue.

With front air outlet to easily discharge the air; and a built-in back-end threaded brass adapter for air plug connection.

4. Vacuum Bleed Hose

Length: 1.8M. Longer than a normal hose for convenient use.

Made of silicone, high temperature and wear resistance.

1. Waste Oil Container

2. Handsfree Mechanism

3. Lid & Settings

4. Vacuum Bleed Hose

Smooth Operation

1. Fill refill bottle half with brake fluid. Open the vehicle’s brake fluid reservoir. Select a right size plastic adapter(C) to screw on the oil refill bottle bolt, install the inverted bottle onto the mouth of the liquid tank. The threaded port (B) must be immersed in the brake fluid, if not, counterclockwise turn the valve till it does.

2. Open the valve(D) and the liquid begins to drop down into the brake fluid tank horizontally, when the brake fluid level in the reservoir has been sufficient to cover the threaded port, the flow will automatically stop.

3. Insert the vacuum hose into the brake bleeder valve through the black nipple. Unscrew 1/4 of the oil bolts anticlockwise with a wrench. Twist the handle of the brake degassing device. The brake fluild will drain out of the vehicle’s braking system (Fig. 3).

4. Check fuel tank and add brake fluid in time. Continue to deflate until there is no bubbles in the hose (Figure 4).

5. Tighten the oil bolt and turn off the automatic connector (Figure 5). Remove the connector and check that the bolts are tightened. Repeat above steps on each remaining wheel.

1. Air Quick Plug

Equipped with European & American type quick plugs for air supply connection.

Durabile and reliable, standing for repeated use.

2. Master Cylinder Adapters

Made of plastic material, lightweight but long-lasting.

Used to install onto the long brass bolts on the lid so that to give stable support as the bottle being inverted.

Sizes: 0.8″-1.2″; 0.95″-1.25″; 1.1-1.45″; 1.25-1.6″.

3. Spare Bleeder Nipple & Barbed Connector

Reinforced rubber construction, corrosion prevention.

For use to be inserted into the brake bleeder valve of the vehicle.

Easy to assemble and remove, provided for stand-by use.

4. Leakproof O-ring

Rubber material, fits closely.

Put it inside the lid of oil refill bottle to help ensure air tightness.

Caring Tips

1. After receiving the product, please check whether there is any leakage or damage in time. If so, please let us know to help you solve it ASAP.

2. Do wear protective masks and goggles during operation.

3. Bottle capacity: 1000ml. You should timely drain off the old oil sucked from the brake system before the bottle is full to avoid oil spilling.

4. Lift the vacuum brake bleeder over the brake pump to ensure that the brake pump works properly.

5. Hold the bottle cap to open the bottle without pulling the trigger or anything else.

6. If there is a leak at the joint of drain plug and the rubber bleeder nipple, seal it with grease.

7. This kit is not allowed for gasoline and fluids which have high corrosion, high concentration and high temperature.

Handsfree & Single-handed: Instead of holding the trigger all the time, there’s a self-locking catch that can hold it precisely in place. Handy portable hook makes it much easier to hang the brake and clutch bleeder on the hood ranther than put it on the ground and bend over several times while working. Simple one person job, flush and refill the entire brake system on your own with this brake fluid bleeder. Really a must have for mechanics and DIYers.
Pneumatic Fluid Extractor: This air-compressed operation requires connecting to an air compressor (prepare it yourself). Vacuum brake bleeder tool works with standard workshop air supply of 90-120 psi, then negative pressure is easily generated in the system, and the waste liquid and air can be quickly sucked out and transported to the waste liquid bottle through the vacuum hose. Drain the waste oil and add new oil in time and in order, so that no spilled mess all over the place.
Range of Appplication: Brake bleeder kit came with 1pc 1L pneumatic brake fluid extractor with 1.8M vacuum hose, 1pc 0.8L oil refill bottle, 4pcs screw-in plastic adapters, 2pcs European & American air quick plugs and barbed connector & brake bleeder nipple. Brake oil extractor helps bleed hydraulic systems on a large number of cars, motorbikes, pickups, Jeeps, trucks, SUVs and many engineering vehicles. Also suitable for replacing engine oil, clutch oil, power steering oil, gear oil, etc.
Easy Brake Bleeding: JoyFans 10-piece pneumatic brake pump adjusting tool set is constructed of heavy-duty metal, anti-corrosion rubber and lightweight PVC for durability and longevity. Waste oil bottle is designed with air outlet, convenient for air removal. Long translucent bleeder hose allows you to directly observe the flow direction, and clarity of the liquid. The small volume of waste oil container makes it necessary to drain the internal waste oil several times during work.
Considerate Service: We are always glad to offer customers satisfactory shopping experience and after-sales services. We have 30-day free return for the products in good undamaged unused condition after you have received the parcel. Each item offers 12-month quality warranty, and it will be packed well to prevent the breakage during the transportation, please purchase and use with confidence. If you have any questions, please feel free to contact us.
4

source: https://amazon.com/dp/B09MF9LZ48