(as of [price_update_date] – Details)
DODYMPS Obd2 Scanner Bluetooth 5.0 Pro Newest Generatio is an intelligent smart obd 2 Bluetooth car diagnostic device and car fault code alarm monitor which designed by professionals OBDII team, product provides professional auto repair data and live data to users, which is also trusted by mechanics and professional engineers.
It supports more than 80 vehicle PID data displays. Each PID supports three display methods: graphics, curves, and numbers, and can set the minimum and maximum display ranges, support fault code alarm and alarm parameters range modification.
Featured OBD2 Scanner Blutooth 5.0 and Fault Code Alarm Monitor
OBDII port Location
The location of the DLC interface(OBDII port) may be different for different car models. For specific models, please refer to the following instructions:
Location A: Available for most models such as BMW, Audi, Volkswagen, TOYOTA, GM, HYUNDAI.
Location B: Available for most models such as Honda, VW Touran, Lexus.
Location C, D, E and F: Available for few other models.
Insert DODYMPS OBDII Pro scanner into the OBDII port (DLC). After insertion, the two LED lights on and the buzzer beep once. After 1 second, the two LED lights off means the device is normal.
Fault Code Detection and Clear
When the car breaks down, the device’s red LED light will always be on, and the buzzer will remind you of the drip sound at a frequency of 0.2 seconds. The buzzer sound will be automatically canceled after 15 seconds. For your safety, please stop the car immediately to the nearest safety Location, open the DODYMPS Pro App to query the detailed information of the fault.
Tip: The fault code detection needs to start the engine.
Quickly find the definition of the fault code and detailed description of the fault code.
When the vehicle fails, the ECU will automatically record the PID data of some core failures. By querying the freezing data, users can easily know the situation of each part of the car when the failure occurs and quickly analyze the cause of the problem.
Tip: Not every fault code will have a freeze frame, which depends on the vehicle’s ECU.
The APP supports the display of common parameters, such as cumulative mileage, cumulative fuel consumption, instantaneous fuel consumption, battery voltage, speed, vehicle speed, intake air flow, intake pressure, coolant temperature, intake air temperature, and remaining oil volume. It is convenient for users to understand their vehicle situation more conveniently and intuitively.
The APP supports more than 80 vehicle PID data displays. Each PID supports three display methods: graphics, curves, and numbers, and can set the minimum and maximum display ranges.
Live Data Abnormal Alarm
Each live data supports abnormal alarm reminder function. When the real-time data exceeds the maximum value of the set range, for example, the maximum speed is set to 80km/h, when the actual speed exceeds 80km/h, the App will pop up a frame warning and the speed will be displayed in red font.
It shows the engine indicator status, record running time and driving distance when engine indicator on, and running time and driving distance when trouble codes cleared. and record engine start-up running time.
Higher Coolant Temperature Alarm and Fatigue Driving Alarm
When the coolant temperature of the car is higher than the coolant temperature set by our OBD device, the red LED light will be always on, and the buzzer will be alerted with a drip sound at a frequency of 0.2 seconds, and the buzzer sound will be automatically canceled after 15 seconds.
App can set the alarm function to be turned on or off, and the coolant alarm temperature can also be adjusted.
How does DODYMPS OBDII scanner Pro connect to your car?
You could refer to the following instructions for the first use.
1.Plug the device into your car’s OBD-II port.
2. Turn on your phone’s Bluetooth and start car engine or keep ignition in the ‘on’ position.
3. Download and install the free ‘DODYMPS Pro’ APP from App Store or Google Play.
4. Run the APP and Scan Device, connect to the Bluetooth named ‘DODYMPS OBD2’.
5. Then you could check the fault code, read data stream, etc.
Be sure to turn the vehicle OFF while plugging scanner in or out.
Be sure to keep ignition in the “running” or “on” position. when connecting the software, otherwise, the App will not connect successfully.
If the above steps still do not get the car’s data, please confirm whether your car’s protocol is within the scope of the OBD device. You could check your car’s user manual or consult your car’s manufacturer. Some car models use the manufacturer’s private agreement, OBD equipment could not read the data.
OBD2 Scanner Bluetooth 5.0 Pro Newest Generation: Read diagnostic fault codes and diagnose your check engine light, shows why it’s on in plain English, the severity of the issue, and lets you clear trouble codes and turn off engine fault indicator. More features including Vehicle engine fault alarm, Fatigue driving alarm, OBD II fault codes look-up library, Freeze frame, O2 sensor test, On-Borad monitoring, Evap system test, Real time data, Live Data, Diagnostic reports, MIL status, etc.
Vehicle Engine Health Monitor & Fault Code Alarm with Switch: DODYMPS OBD II scanner pro will alarm you if it had detected a vehicle engine problem such as Gas Cap, Oxygen Sensor, Air Fuel Ratio Sensor, Mass Air Flow Sensor, Ignition Coils, Spark Plug Wires, Spark Plugs, Thermostat, EGR Valve, Evaporatative Emission Canister Purge Valve (EVAP), Catalytic Converter, DPF Temp, Coolant Temp, Oil Temp, Fuel Pressure, etc. the app built in alarm switch and support alarm parameter range modification.
Easy to Use BLE5.0 Adapter & Exclusive Free App: The powerful DODYMPS Pro Scanner that composed of a Bluetooth 5.0 adapter and a professionally free DODYMPS Pro App compatible with IOS and Android devices, BT5.0 connectivity makes this OBD2 scanner to be stable and easy to use. AutoVIN technology is equipped for quick and accurate vehicle VIN retrieving. The professional OBDII Bluetooth diagnostic scan tool trusted by mechanics and developed by DODYMPS.
Wide Vehicle Compatibility: Our OBD2 Bluetooth 5.0 Low Energy scan tool works on most 12V gasoline powered (no all-electric or diesel) OBDII cars after 1996 in USA, EOBD cars after 2000 in EU and Asian cars, and newer OBD II & CAN vehicles. It supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and ISO15765 CAN (Controller Area Network).
Lifetime Free Updates and Warranty: Lifetime free updates allow you to get the newest software for this DODYMPS automotive diagnostic tool without extra charge, gaining more available vehicle models and store newest car model data on the original basis. We offer one-year warranty and comes with worry-free, and easy to reach, friendly, customer support.