Digital Clamp Meter T-RMS 1999 Counts NCV Multimeter

Price: $15.99
(as of Jan 07,2023 14:42:02 UTC – Details)

Product Description

The Digital Clamp Meter Kit True RMS (1999 Counts) from Plusivo Includes

1 pc Digital Clamp Meter (1999 Counts)1 pair Needle Tipped Test Probes with Silicone Cover (gold plated, Cat II. Voltage: 1000V, Current: 20A)1 pair Normal Test Probes with Silicone Cover (gold plated, Cat III. Voltage: 1000V, Current: 20A)1 pair Alligator Clip Test Leads1 pair Double-ended Alligator Clips Wire1 pair Male Dupont Jumper Wire to Alligator Clip1 pair Female Dupont Jumper Wire to Alligator Clip1 pair Mini Grabber Test Hook Clips to Alligator Clip1 pair U-type Test Fork Clips to Alligator Clip1 pc mini wire stripper tool2 pcs mini screwdrivers1 pc Black electrical tape1 pc Plusivo flyer (contains instructions about the user guide, if unsuccessful, please contact seller)

Features: Autoranging 600 V input voltage protection Auto Power-OFF HOLD function/Back Light Over load indication: “OL” symbol displayed when exceeding the measuring range Low battery indication

PLUSIVO Digital Clamp Meter – True RMS (1999 Counts)

Specifications

AC current range: 0.1A to 600AMaximum input voltage: 600VResistance Range: 200/2k/20k/200k/2M/20MDiode: Open voltage: 1.999 VContinuity: When the resistance value is less than 50 Ω, the buzzer turns onNCV: Non Contact
Maximum opening distance of the clamp jaw of 25 mm Model A has a 3 and 1/2 digit LCD (1999 counts) Peak measurements Power supply: 3 V, 2 x 1.5 V AAA batteries

Hold / Backlight (BL) Key

Press once to freeze or retain the display reading. Long press to activate the backlight.

FUNC Key

Press the “FUNC” key to switch between the different measurements such as between diode and continuity.

Digital Display with Back Light

“OL” displayed when exceeding the measuring range or if test probes are connected in reverse polarity

Features

Clamp Jaw Opening Distance

The Jaw is marked with maximum current or voltage value making it safer and easier to use. The design is suitable for one-hand operation.

NCV Function

The red LED at the top right of the panel flashes quickly when an excess electric field is detected

can test electrical circuit or equipment without touching it“EF” is shown when there is no measurementdisplay changes from “-” to “—-” depending on the strength of the electric field.

Included with Test Leads and Accessories

1 x Plusivo Digital Clamp Meter, 2 pairs x Test Leads, 5 pairs x set of test leads, 1 pair x crocodile clips. 1 x mini wire stripper tool, 2 pairs x mini screwdrivers, 1 x insulating tape, 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag

Maximum Display
1999 Counts 3999 Counts 6000 Counts 6000 Counts 1999 Counts 1999 Counts

AC Voltage
2V / 20V / 200V / 600V 4V / 40V / 400V / 600V 6V / 60V / 600V 6V / 60V / 600V 200V / 500V 200V / 500V

DC Voltage
200mV/2V/20V/200V/600V 400mV/4V/40V/400V/600V 600mV/ 6V / 60V / 600V 600mV/ 6V / 60V / 600V 200mV/2V/20V/200V/600V 200mV/2V/20V/200V/600V

AC Current
2A/20A and 200 A / 600 A 40 A / 600 A 6A / 60A / 600A 6A / 60A / 600A ✗ ✗

DC Current
✗ ✗ ✗ 60A / 600A 2mA/20mA/200mA/10A 2mA/20mA/200mA/10A

Resistance
200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ 200Ω/2kΩ/20kΩ/200kΩ/2MΩ 200Ω/2kΩ/20kΩ/200kΩ/2MΩ

NCV

✓

✓
✗ ✗ ✗ ✗

Flashlight/Backlight

✓

✓

✓

✓
Backlight Backlight

Temperature/Frequency
✗
✓

✓

✓
✗ ✗

Package Dimensions ‏ : ‎ 8.07 x 4.25 x 2.52 inches; 1.23 Pounds
Date First Available ‏ : ‎ May 29, 2022
Manufacturer ‏ : ‎ Wider Wire & Cable Co., Limited
ASIN ‏ : ‎ B0B2MX6WM8

True-RMS Autoranging Multi -Function Clampmeter with 3 and 1/2 digit LCD (1999 Counts): easy to use/operate; accurately measure AC current, test AC and DC voltage, resistance. Can also do continuity and diode tests
NCV or Non Contact Voltage Detector: detect presence of voltage in an electrical circuit or equipment without touching the wires, red LED will flash quickly when an excess electric field is detected, NCV sensor is at the right upper area of the clamp
With Accessories: Test probes, various types of test leads, crocodile clips, mini wire stripper tool, etc, has LCD display with backlight, data hold function, low battery detector, overload protection, auto power OFF after 15 minutes of inactivity
Compliance with safety requirements of IEC safety standard 61010-1 IEC61010-031:2002 and IEC61010-2-032 Measurement Category (CAT.) II 600 V overvoltage protection standard
With durable carrying bag, electronic user guide; Satisfaction guarantee: 30-day manufacturer guarantee and lifetime customer support

How to Use a Digital Clamp Meter T-RMS 1999 Counts NCV Multimeter for Electricians

A digital clamp meter T-RMS 1999 counts NCV multimeter is a useful tool for electricians. It is used to measure current, voltage, resistance, and continuity. This guide will provide an overview of how to use a digital clamp meter T-RMS 1999 counts NCV multimeter.

Before using the digital clamp meter, it is important to ensure that it is properly calibrated. This can be done by following the manufacturer’s instructions. Once the meter is calibrated, it is ready to be used.

To measure current, the clamp meter should be placed around the wire that is carrying the current. The current can then be read on the display.

To measure voltage, the meter should be placed across the two points of the circuit that are being measured. The voltage can then be read on the display.

To measure resistance, the meter should be placed across the two points of the circuit that are being measured. The resistance can then

The Benefits of Auto-Ranging Measures Current Voltage Resistance Diodes Continuity (AC Clamp Meter)

Auto-ranging measures current, voltage, resistance, diodes, and continuity, making it an invaluable tool for electricians and other professionals who work with electrical systems. This type of meter, also known as an AC clamp meter, is designed to automatically adjust its range to the current being measured, allowing for more accurate readings.

The auto-ranging feature of an AC clamp meter is especially useful when measuring current. By automatically adjusting the range, the meter can accurately measure current in a wide range of applications, from low-voltage circuits to high-voltage systems. This eliminates the need to manually adjust the range, which can be time-consuming and potentially dangerous.

The auto-ranging feature also makes it easier to measure resistance. By automatically adjusting the range, the meter can accurately measure resistance in a wide range of applications, from low-resistance circuits to high-resistance systems. This eliminates the need to manually adjust the range, which can be time

Troubleshooting Electrical Problems with a Digital Clamp Meter

Troubleshooting electrical problems can be a daunting task, but with the right tools, it can be made much easier. A digital clamp meter is a versatile tool that can be used to diagnose a variety of electrical issues. This article will provide an overview of how to use a digital clamp meter to troubleshoot electrical problems.

The first step in using a digital clamp meter to troubleshoot electrical problems is to identify the source of the issue. This can be done by visually inspecting the wiring and components for signs of damage or wear. Once the source of the problem has been identified, the digital clamp meter can be used to measure the current, voltage, and resistance of the circuit.

To measure the current, the digital clamp meter should be placed around the wire that is carrying the current. The meter will then display the current in amperes. To measure the voltage, the digital clamp meter should be placed around the wire that is carrying the voltage. The meter

Understanding the Different Modes of a Digital Clamp Meter T-RMS 1999 Counts NCV Multimeter

A digital clamp meter T-RMS 1999 counts NCV multimeter is a versatile tool used to measure electrical current, voltage, and resistance. It is a useful tool for electricians, engineers, and technicians who need to diagnose and troubleshoot electrical systems.

The digital clamp meter has several different modes that can be used to measure different types of electrical parameters. The most common modes are AC current, AC voltage, DC current, DC voltage, and resistance.

AC current mode is used to measure alternating current (AC) in an electrical circuit. The clamp meter measures the current by clamping around the conductor and measuring the magnetic field generated by the current.

AC voltage mode is used to measure the voltage of an AC circuit. The clamp meter measures the voltage by clamping around the conductor and measuring the electric field generated by the voltage.

DC current mode is used to measure direct current (DC) in an electrical circuit. The clamp meter measures the

Safety Tips for Electricians Using a Digital Clamp Meter T-RMS 1999 Counts NCV Multimeter

1. Always wear protective gear when using a digital clamp meter. This includes safety glasses, gloves, and a face mask.

2. Make sure the digital clamp meter is in good working condition before use. Check for any signs of damage or wear and tear.

3. Read the user manual carefully before using the digital clamp meter. Familiarize yourself with the safety instructions and operating procedures.

4. Make sure the digital clamp meter is properly grounded before use.

5. Always use the correct settings for the job. Make sure the digital clamp meter is set to the correct range and mode for the task at hand.

6. Never exceed the maximum current rating of the digital clamp meter.

7. When measuring current, make sure the jaws of the digital clamp meter are firmly clamped around the conductor.

8. When measuring voltage, make sure the probes of the digital clamp meter are firmly connected to the terminals.

4.5

source: https://amazon.com/dp/B0B2MX6WM8