Auto Code Reader for Land Rover/Jaguar ND602 OBD/EOBD Diagnostic Scanner Enhanced Oil DPF BMS EPB SAS Reset Battery Check Engine Mutil-System OBD2 Scan Tool


Price: $129.99
(as of Jul 29,2021 07:16:44 UTC – Details)


Product Description

11

11

CAUTIONS:

1. Don’t connect or disconnect any test equipment with ignition on or engine running.

2. This tool ONLY support the 16 PIN OBD diagnostic function.

NexDiag ND602 for LAND ROVER and JAGUAR is a professional and powerful vehicle fault diagnosis tool for car fans, small garages, repair workshop and mechanics by delivering OE-level diagnosis on all the electronic systems of LAND ROVER and JAGUAR.

It supports most of the RANGE ROVER vehicles from 1999 to 2016, the LAND ROVER vehicles from 1999 to 2018 and the JAGUAR vehicles from 1994 to 2018 with standard OBD 16PIN DLC for Diesel, Gasoline, Airbag, ABS, Gearbox and other ECUs.

Also featuring with special functions such as Oil Light Service Reset, DPF Regeneration, Battery Management Service Reset, EPB Electronic Park pad Brake Reset, Steering Angle Sensor Reset, etc. Meanwhile, it is also a proper tool working with OBD/EOBD diagnostic for engines of all car, SUV, mini-van and light duty vehicles after 1996.

Notice: ND602 may automatically reset while being disturbed by strong static electricity. THIS IS A NORMAL REACTION.

LAND ROVER & JAGUAR Car Scanner with Reset Functions and OBD2 Functions

11

Battery Matching: Battery matching is to use the vehicle diagnostic equipment to reset the monitoring unit of the vehicle battery, remove the original fault information about the battery’s low power, make it rematch, and take the relevant information of the existing battery as the standard to monitor

DPF Regeneration: The regeneration function of DPF is to regularly remove particulate matter in the filter by means of combustion oxidation(such as high-temperature heating combustion, fuel additive or catalyst to reduce particulate ignition point combustion), so that the performance of the filter is always the best and stable

EPB System: The electric parking brake or the EPB is an advanced version of a conventional parking brake or handbrake.

Headlights Matching: The adaptive headlight system can decide whether to turn on the headlights automatically according to the intensity of ambient light, monitor the vehicle’s driving speed and body attitude, and adjust the lighting angle of the headlights.

Airbag System: In a car collision, the car airbag can reduce the head injury rate by 25% and the facial injury rate by about 80%. Therefore, the inspection of the airbag system is very important.

A/C System: A car air conditioning system consists of a compact version of the components of the normal air conditioner that has an evaporator, compressor, condenser, expansion device, and a fan which are fitted in a car to provide air condition inside the passenger’s compartment.

Tire Pressure Reset: When the tire pressure fault indicator light is on, after maintenance, it is necessary to reset the tire pressure through this function and turn off the light.

Gearbox Diagnostic: This function can complete the transmission self-learning, in order to achieve a more comfortable more ideal gears changing.

Steering Angel Sensor Reset: After the four-wheel alignment, body repair and so on, it is required to do the steering angle reset to zero.

Suspension Matching: This function can adjust the height of the vehicle body

Engine Oil Light Reset: When the light is on, it indicates that the car needs maintenance, reset the mileage or driving time to zero, so that the maintenance light will be off, and the system will start a new maintenance period.

Break Pad Reset: When the brake pad is used to a certain thickness, the brake pad induction line will be worn. At this time, the brake pad induction line will send a signal to the on-board computer to prompt the replacement of the brake pad. Reset the brake pad after the replacing, otherwise the car will continue to alarm.

11

Battery Check

ND602 can check the battery status within 1 second, telling you the real-time battery status and give you Make a quick battery health check by diagnostic via the ECU communication and read out the current battery status and value.

Then give you 6 levels of warning tips:

A. <10.8V(before Starting): Too Low; Change your battery, otherwise, might not be able to start;

B. 10.8V-11.8V(before starting): Slightly low; Difficult to start, please turn off other electronics and start vehicle to charge;

C. 11.8V-12.8V(before starting): Normal;

D. 12.8V-13.2V(after starting): Too Low; Might not be able to charge the battery, please check other electrical load;

E. 13.2V-14.8V(after starting): Normal;

F. >14.8V: Too High; Might damage the battery, please check the engine stabilizer.

1

1

2

2

1

1

2

2

Regeneration Reset

This option support DPF (Diesel Particulate Filter) functions: Diesel particulate filter dynamic regeneration.

Battery Management Service

This option support Battery check and Battery Management Service Reset, register the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode.

Electronic Braking PAD Reset

This option support Open and closed the brake pads, Driv the parking brake to the latching position, Drive the parking brake to the latching position, Parking brake unjam procedure.

Steering Angle Sensor Reset

This option support Steering Angle Sensor Adjustment after changing a new steering angle sensor, or changing the control unit,or change the steering column, or some trouble codes which can’t be erased. This is a MUST DO step.

2

2

2

2

3

3

Oil Maintenance Reset Service

Reset the oil service counters, Carry out the service interval reset, Oil dilution reset, Oil change reset.

Reset the mileage or driving time to zero, so that the maintenance light will be off, and the system will start a new maintenance period.

Full OBD2 Functions

CAUTION: Don’t connect or disconnect any test equipment with ignition on or engine running.

√ Read code & Erase code

√ I/M readiness

√ Data stream

√ View freeze frame

√ O2 sensor test

√ On-board monitor test

√ Evap system

√ Vehicle infomantion

Fix Car By Yourself

Plug and play, no need any baterry. With its LCD color screen, it is easy to operate and read. Extremely suitable for car fans, small garages, repair workshop and mechanics. ND602 can check the vehicles with in seconds and directly show you what the problem is, saving you time and extra spending to the repairstore.

11

It can read Control Unit Information, Read Codes, Clear Codes, and Read Live Data as shown:

Range Rover 1999-2016/Range Rover Sport 2005-2016/Range Rover Evoque 2012-2017

Range Rover Evoque convertible 2016-2017/Range Rover Evoque 2016-2017

Discovery 2 1999-2004/Discovery 3 2004-2009/Discovery 4 2010-2015

Discovery Sport 2015-2017/Freelander 1997-2014/Defender 1997-2012/XJ TYPE 1994-2018

XF TYPE 2008-2018/XK TYPE 1997-2015/XE TYPE 2016-2018

F TYPE 2014-2018/F PACE 2017-2018/S TYPE 1999-2008/X TYPE 2001-2009

Support Language

√ English √ Deutsche

√ French √ Russian

√ Spanish √ Italian

☀[Specilized for LAND ROVER] ND602 allows you to perform reset for a new calculation of Oil reset, DPF Regeneration, Battery Check, BMS Reset, Electronic Parking Brake Reset and Steering Angle Sensor Reset for LAND ROVER and JAGUAR in complete, accurate, system diagnosis. To provide you a convenient services for vehicle maintenance.
☀[100+ Systems Diagnosis] Read and erase trouble codes of LAND RVOER / JAGUAR either Diesel or Petrol for Engine, Airbag, Transmission, Instrument Cluster, ABS, SRS, IHKA, IKE, A/C, Air Suspension, etc. up to more than 100 different ECU systems. Multi-functional and multi-system detection, suitable for both professional car repairers and DIYers.
☀[Wide Coverage] ND602 supports most of the RANGE ROVER vehicles from 1999 to 2016, the LAND ROVER vehicles from 1999 to 2018 and the JAGUAR vehicles from 1994 to 2018, either petrol or diese. Meanwhile, it is also a proper tool working with OBD/EOBD diagnostic for engines of all brands of car, SUV, mini-van after 1996. Please consult your model and problems to be solved before buying.
☀[Full OBDII Functions] ND602 can use as a universal car code reader work on most obdII vehicles. It can read & erase fault code, Inspection Maintenance Program, read data stream and freeze frame, provides O2 sensor test, On-board monitor test, EVAP Monitor Test and Vehicle infomantions. Save your unnecessary repair costs and time to repair shops.
☀[Worthy To Own] Easy to operate and carry, no battery needed. Equipped with a 2.8” TFT 262K true color, 320*240 QVGA LCD display, supports 6 basic languages -English, French, Spanish, Deutsche, Italian or Russian and also products provide one-year free product service.

Leave a Comment